(System) - Resource Sharing Borrowing Requests Troubleshooting
Troubleshooting Borrowing Requests
The list below uses the statuses that get applied to requests when you look at the whole lending and borrowing queues. In other places in Alma, like the task list widget and in custom sets in Rapido, these statues may be worded differently or use different phrasing, but the full queue and the requests themselves will use the language used below. For non-Rapido campuses using only Resource Sharing, you can find the borrowing queue by going to the fulfillment menu and the Resource Sharing sub-heading. For Rapido campuses, your request queues have moved over to the top right bar icons. Click the borrowing tab and then "All active borrowing requests" to see the full borrowing queue.
(Rapido campuses: You can find additional information about the Rapido workflow and request statuses in their online documentation:
Highest Priorities
General Messages - Check daily. These are messages sent by staff at the lending campus concerning your patrons’ requests. These should show up on your task list. Correspond with patrons if necessary and respond to the message ASAP. Dismiss message after handling to remove from your task list.
Created Borrowing Request - Requests in this status have yet to run through the locate process to find a lending partner. These require intervention to get them moving.
Physical Items
- Something may be interfering with the automated locate process. Check the request details rota tab to make sure there are rotas attached to the request. Try Recalculate Partner.
- Rapido libraries:
- It's possible that none of the libraries you are actively connected to have the item. You may need to search for Resource Sharing Directory partners and initiate a connection with a new partner if a library has an item that is not a Rapido library, but has their data in the Resource Sharing Directory.
Digital Items
- If you are using mediation rules (Rapido), your requests will stop in this status. Edit the request to see if there if there is any missing metadata you can add before clearing your request labels to allow the request to move on.
- If your labels are cleared and your mediation rules are no longer stopping the request, check the Rota tab to see if there are rotas added to the request. Try Recalculate Partner.
Locate Failed - Click on the Recalculate Rota option and then click on Locate. Wait a few minutes to see if that worked. If not you might try canceling and replacing the request from within Alma. This should happen very rarely. If you notice it happening more often please alert your SysAdmin.
- Rapido libraries can try to "Enrich from Global Index" to verify and update request metadata from the global index. You can use Find Partners to find a Rapido partner library to send the request to.
Ready to be Sent - Check the request to make sure it is not missing any important metadata--this is especially important for Rapido campuses with RapidILL integration into Alma. These requests might just need some verification of citation info, usually the ISSN. You can try using the Enrich from Global Index option. Once you are finished editing the citation info, you can save and click Send. If that doesn't work, try changing the request status to Created Borrowing Request and save it. This can sometimes re-start the locate process and get the request moving on its way.
Local Holding (RapidILL integration in Alma) - A borrowing request was placed for an item that Alma thinks you own and can fill. Check your local holdings to see if you do own the requested resource. Check your holdings carefully because this status can catch temporary items in your RS borrowing locations, too.
Physical holdings
- If it's an article or chapter, you can choose to route the request through your digitization workflow if you have the physical item.
- Choose Fill Locally > Create Lending Request (you will be your own lender)
Digital holdings
- Find and download the digital resource
- Choose Fill Locally > Upload File
Can't supply?
- If your copy is not available to supply to your patron, choose Override Local Holding to force the request to move on to another lender.
Request Sent to Partner - Look for requests that have not been fulfilled; this should be done at least once a day to ensure your patrons are getting the items they request anything older than a created date of yesterday we will want to follow up on
- Filter out requests in Alma by request status and creation date older than yesterday.
- Click on edit and look at the Audit tab. These sometimes take some investigating to determine why the request is not getting filled.
- Check to see if the partner listed on the request matches the assigned partner in the audit. If not, re-add the main NZRota and then click Locate. Sometimes this will result in the request failing and cancelling (the patron should receive a cancellation email).
- You can contact the partner campus to see if they received the request. It could be stuck with a Locate Failed or Created Lending Request status or they may have encountered another problem or delay in filling the request.
- If there are other campuses listed on the rota, you can reject the active lender to force the request to move on to the next one. [Edit > Rota > Actions > Reject] on the one listed as active.
- Sometimes these say waiting for cancel response. In that case, check the patron’s account to see if they received a cancellation email. If not, check with the patron to make sure they still want it.
- If they do not or you can tell that they actually cancelled the request, cancel the request again and change the status to request completed.
- If they do want it, cancel the stuck request and attempt to re-place it in Alma. If you’re not sure, cancel it and make sure you check the box to notify patron of the cancellation. They can choose to re-request in ILLiad if they want.
Rejected By Partner (Rapido libraries) - If your library is using Rapido, you are set up to have requests get parked here if they get rejected. Users are not notified as the request is not yet complete (if you are on Alma only, the opposite is true). The requests may have been rejected automatically because of bad data coming out of Primo, so check over the request fields as you may be able to correct them and send the request out again by using the recalculate partner option or by searching for partners to add to the request. If you believe there are truly no lenders, cancel the request and make sure the notify patron box is checked.
Normal priority (but still need some monitoring)
Borrowing Requests with Active Notes - This status appears on your task list and is mostly just informational. You can also see these by looking at your borrowing list and using the facet of Notes by Partner. These only appear if you have notes that have not been dismissed. These show up primarily when you convert a hold request for one of your patrons to a resource sharing request or when a request was rejected by one partner, but has moved on to another.
- Click on Edit and look at the notes tab. Use the toggle to deactivate the notes and stop them from appearing on your task list, if desired.
Recalled by Partner - (Borrowing Requests Recalled on task list) - Informational only. We do not need to do anything with these. You can check your patron’s account to verify that they received a recall email. Send friendly reminders to your patron’s account
Cancelled by Staff -
- Do not click on Remove. (We noticed that this removes crucial statistics from analytics.)
- Select the item and in the upper right hand corner change the status to Request Completed and Click on Change Status.
Waiting for Cancel Response - Click on the Cancel button underneath the request, you will see a pop up box. Select a cancellation reason and check the box notify user and then click Confirm.
Returned Item by Patron - Check this queue every few days and look for requests with Update Dates of “Up a day or two days ago.” You can batch select all in the list and then change the status to Returned Item to Partner. This just happens in a multiple library environment and this step helps keep the queues clean.

Returned Item to Partner - Check this queue every two weeks and look for requests with Update Dates of “Up to a Week Ago” or “Older.” These items could be lost in transit or they might not have been checked in correctly by the owning library or a step was skipped when sending them back to the lending library.
- First check in with the partner institution to see that item was received by the partner.
- Click on return option
- Click edit and then change the status to Request Completed and Save
Shipped Physically - These items have been shipped by the lender and are now en route to the borrowing library.
- Check this once a week to see for requests older than a week or so.
- Click on Edit and then Click on the Audit tab. If it has a shipped status date of older than two weeks, follow up with the lending library or SCLS.
- If the item cannot be located, check with the patron and place a new request if they still need it.
Physically Received by Library - Check this queue once a week or so. Limit it to requests with an Update Date of “Older”. You’re looking for things that should have already expired from your hold shelf, but might not have been removed. (Reminder: use the Expired Hold Shelf option in Alma to regularly remove expired holds. If the item is on this list, use the transit option and then scan it in at the Resource Sharing Library to get it back where it belongs using the proper workflow sequence.)
- Check hold shelf to make sure item is still there or check patron’s account to see if it was checked out to them.
- If the item is still there – email the patron a reminder.
- If the item is not there and is checked out to the patron, click on Edit and manually change the status to Loaned Item to Patron and click Save.
- If the item is neither on the hold shelf, or checked out to the patron, notify the lending library as it may have gone missing.
Searching for completed requests
By default, Alma displays only active requests in our queues, but you can use the facet list to switch over to inactive/completed requests by clearing the active status filter. This should appear at the top of your list of facets, but since the facet order is customizable, you might need to look through the whole list if you've customized your display.
You may need to do this if you find that you cannot receive an item because Alma claims there is a duplicate barcode. That means you had that same item once before and the borrowing/lending process was not completed properly to close the last request and delete the temporary item from your IZ. You will need to find it, click on the return option (if available) and remove the request before you can process the new one.
