UWMSN - JEMS Hire - Summer Appointments

This KB document explains summer appointments including how to set up summer appointments, when the Summer Hire function can be used, and how to pay lump sum payments to current employees for summer appointments.

  • This document applies only to UW-Madison. Users from other campuses should refer to documentation intended for their campuses.

Procedure At–a–Glance

Category: Summer Appointments
Audience: HR and Payroll professionals who hire and manage summer appointments.
Overarching Process: Overview of hiring summer appointments (summer service and summer session)


NOTE:   There is also a To the Top link at the end of each section.


This KB covers:

  • How to add summer appointments into JEMS using the Summer Hire function
  • When to use JEMS Summer Hire function
  • How to add lump sum payment information to summer appointments
    Key Terms

    Here is a list of key terms that may be used with managing summer appointments:

    • Academic Year Employees - also known as C basis or C pay basis – employees paid on a 9-month contract.
    • Summer Service & Summer Session – separate job during the summer, either Research/Other or Teaching, by employees who hold a C basis position during the academic year or are hired from outside the university only for summer employment.
    • Expected Job End Date (EJED) - the last day the employee is in pay status in that job.
    • Short Work Break - Academic Year Employee Jobs are placed on Short Work Break through a batch process run by UW Shared Services at the end of the contract year. This makes their payroll status on that job inactive until the start of the fall contract.
    • Return from Short Work Break - Academic Year Employee Jobs that are renewable positions are returned from Short Work Break on the first day of the fall contract through a batch process run by UW Shared Services.  This returns the payroll status of that job to active.
    • Auto Termination - a nightly process that automatically adds a termination row to a job (with an EJED) with an effective date of 1 day after the EJED.



    Frequently Asked Questions

    • What is a Summer Appointment?
      • A summer appointment is for employees who are C basis employees during the academic year; or a person from outside the university and falls outside the academic year (i.e., dates between late May to late August).

    • What is the Summer Hire function and when can it be used?
      • The Summer Hire function can be utilized when hiring someone on an active C-Basis appointment that will work over the summer. The continuity code of the active C-Basis appointment must be either renewable or terminal with the EJED being after the end of the current academic year. The C-Basis job also cannot have any change in job title, rate of pay, and department.

    • What if the employee being hired does not meet the requirements to use the Summer Hire function?
      • Individuals hired from outside of the UW System are hired via PVL/PVL waiver or hired directly in JEMS Hire depending on title: General Information Regarding Recruitment

        The JEMS Hire/Transfer function should be used.

    • Can employees hold multiple summer appointments?
      • Yes, employees can hold multiple summer appointments. Divisions should monitor multiple appointments to ensure the employee is not in overload status or exceeding their academic year salary equal to 6.5 biweekly pa periods for the summer.

    • When are PVL waivers required for hiring?
      • A waiver is required when the employee doesn’t have an active C-Basis job in HRS, or the summer job is in a different department, or the rate of pay or job code are different.

    • What appointments are eligible for a summer lump sum payment?
      • Divisions have the option to pay current C-Basis faculty, academic staff, and limited appointments a lump sum instead of by FTE on summer session (SS) or summer service (SV)pay basis, and that amount will be included when calculating the limits on the total amount available to pay C-basis employees in the summer. If you want to pay a lump sum in the summer instead of by FTE, the appointment must be created through the JEMS Hire/Transfer function.

    Procedural Steps

    • Processing a Summer Appointment using the Summer Hire function.
      • Step 1

        A) Access the Summer Hire Function through the JEMS Hire System

        JEMS Hire Main Menu Screen

      • Step 2

        A) Search for person using Empl ID and click search
        B) Select the record to use
        C) Enter in pay basis
        D) Click add hire

        Search for Person

      • Step 3

        A) On the Position Tab - Fill in FTE

        Position Data

      • Step 4

        A) Enter effective date
        B) Enter EJED

        Job Data tab

      • Step 5

        A) Enter HR Contact information

        HR Contact tab

      • Step 6

        A) Once Step 5 is complete it is time to choose one of the following actions:
        - Submit - submit the form for divisional approval (if department)
        - Approve - approve summer hire (if your position is responsible for approving summer help)
        - Send to HRS - push data to HRS

    • Hire Processing for a new C Basis employee hired to start in the fall but will begin working prior to the appointment start date.
      • These steps should be used when a new employee has been hired for a fall appointment, but will start prior to the appointment start date. These steps should be followed if the hire is not yet in HRS.

          Academic New Hire Working in the Summer System
        1 Check the PVL,to make sure the Assured Consideration Date has passed. PVL
        2 Create the C-Basis job first, using the same effective (hire) date as the intended summer position
        JEMS – Hire/Transfer
        3 Division manually places the employee's C-Basis job on a short work break with the same effective date as the hire, with a sequenced row = 1.

        4 Create a PVL waiver for the summer job using waiver reason Summer Service or Summer Session
        5 Once OHR approved, complete hire in JEMS Hire/Transfer function JEMS – Hire/Transfer
        When summer employment for a new fall hire is unknown, OHR asks that you wait to enter the fall appointment until 60 days prior to the start of the fall semester, if feasible. This will give units time to consider summer appointment needs. Consult with OHR in extenuating circumstances.
    • Steps to take if a person is hired for fall and hire has already been made in HRS
      • These steps should be used when a new employee has been hired for a fall appointment, but will start prior to the appointment start date, and the appointment is already in HRS.

          Fall Hire Working in The Summer - Already in JEMS System
        1 If the, C-Basis job was entered before the summer start was known, contact the UW Shared Services (UWSS) to change the start date of the job to match the start date of the summer job. UWSS will automatically place the job on short work break. HRS
        2 Create PVL waiver for the summer job. PVL
        3 Complete the summer hire using JEMS - Hire/Transfer function.
        JEMS - Hire/Transfer
    • Steps to take when an individual will work multiple summer appointments

      • Working Multiple Summer Appointments
        1 Always enter the appointment with the earlier effective date first.
        2 Create separate Employment records (Empl Rcds) for each appointment.
      • Steps for Adding Lump Sum Payments
          • Follow these steps when hiring a current C-Basis employee on a lump sum instead of by FTE. The appointment must be set up using the JEMS Hire/Transfer function within the JEMS Hire system. Note: Lump sums cannot be used if an employee must record hours for effort reporting.

            • Step 1

              A) Access the Hire/Transfer feature through the JEMS Hire System

              JEMS Hire main screen
              • Step 2

                A) Search for person using Empl ID and click search B) Select the Recruitment Type: No associated PVL/Waiver

                Lump Sum Search
            • Step 3

              A) The Person and Person Contact tabs need to be completed per normal JEMS Hire.
              B) The Position tab need to be completed. Fill in the FTE as 0 and the Continuity as 02A.
              C) All the other fields on the Position tab should be filled in to match the hiring information.

              Lump Sum Position tab
            • Step 4

              A) Complete the Job tab (The effective date and expected end date must fall within the summer calendar.)
              B) The additional pay/lump sum should be filled in with the proposed amount of the lump sum (This information does not push to HRS - Once approved, the payment should be set up in Additional Pay in HRS).
              C) The pay basis must be Summer Session (SS) or Summer Service (SV).
              D) The comp rate must be $0 since you are paying a lump sum payment.

              Lump Sum Job Data tab
            • Step 5

              A) Complete the remaining JEMS tabs and send the hire to HRS. Once the appointment is in HRS, the Additional Pay must be entered by the Division into HRS.

              Additional Considerations for Lump Sum Payments

              When adding Additional Pay, choose the correct employment record (Not C Basis empl record).
              FAASLI Lump earnings code = LWR (Use this when FTE <1.0).
              Effective date = beginning of the pay period or if they were hired mid-pay period, use the hire effective date.
              Expected End Date = expected last day of the summer appointment.


        Additional Resources

        • Summer Hiring Action Table
          •  System(s) Used  When to Use  Exceptions/Notes
            JEMS Hire: Summer Hire feature A C-basis employee was active during the previous spring semester, and the summer job will be at the same rate of pay, title, department. Visiting titles and rehired annuitants cannot use Summer Hire and must be hired using one of the other systems/approaches.
            JEMS Hire: Recruitment Type No associated PVL/waiver Hiring Summer Session or Summer Service positions to be paid as a lump sum. Can only be used when pay basis is SS/SV and Comp Rate is $0.
            Used for visiting titles and Professor Emeritus appointments, which don’t require a PVL/waiver.
            PVL/Waiver: Once approved then use JEMS Hire Recruitment Type Hired Based on PVL/waiver Individual is being hired from outside UW, or is current C-basis employee but will be working in a different title, department, or position. A-basis employees asked to work in the summer are not paid as SS/SV basis. They need to be set up as A-basis.

      • UW-Madison Summer Term Calendars

    Give us feedback about this knowledgebase document.
     Enter a number between 2000 and 3000.

      Keywords:summer appointments, lump sum, JEMS, JEMS HIRE Summer Help, 2/9ths policy, cbasis appointments, PVL Waiver,   Doc ID:64111
      Owner:Sheryl F.Group:HR Communities of Practice
      Created:2016-06-14 14:26 CSTUpdated:2023-01-30 09:55 CST
      Sites:HR Communities of Practice
      Feedback:  0   0